Solid Carbide 4 Cutting Edges Insert Knife 12 x 12 x 1.5mm x 45 Degree Angle tc-CNC Bit

Solid Carbide 4 Cutting Edges Insert Knife 12 x 12 x 1.5mm x 45 Degree Angle tc-CNC BitMaterial: Chipboard, Balsa Core, Hardwood Softwood, Plastic Overview Replacement carbide knife for RC 2255, RC 2259, RC 2261, and RC 2263 cutters Recommended for: Chipboard, Balsa Core, Hardwood Softwood, Plastic

Exceptionally Easy Smooth Glide under HIGH or LOW Tension

providing clean dust-free sanding when combined with a Mirka® dust extraction system

When you're hard at work in your shop

45780-K tool file to be used with all versions of Vectric software from version 8

Precision lens cursor provides exact measurements

No more aching muscles

simply swing it up or slide your board into the front of the curved foot

Tests have shown that Autonet produces a minuscule amount of dust compared to conventional dry sanding technology with extraction

You build the support wings out of plywood (or another sheet material)

Hog out material in a fraction of the time that a straight bit would require

and easily attach the Bench Clamp Base

1-Phase Arbor Size: 5/8" Arbor Speed: 4500 RPM Blade Size: 10" Blade Tilt Direction: Left Maximum Blade Tilt: 45 Degrees Maximum Depth of Cut At 90 Degrees: 3-1/8" Maximum Depth of Cut At 45 Degrees: 2-1/8" Maximum Rip Right of Blade w/Included Fence & Rails 37" Floor to Table Height: 35" Table Size with Extension Wings Width: 44" Table Size with Extension Wings Depth: 27" Distance Front of Table to Center of Blade: 13-3/8" Distance Front of Table to Blade At Maximum Cut: 8-21/32" Dust Port: 4" Overall Width (side-to-side): 66-13/16" Overall Depth (front-to-back): 39-3/8" Shipping Weight: 368 lbs